Oil Level Controller (Single Switch for Low Level Alarm in Explosion Proof Enclosure) Operating Principle KENCO Oil Level Controllers are designed to maintain the running oil level in the crankcase of stationary engines, compressors, and mechanical lubricator boxes. The KENCO oil controller works in conjunction with an overhead oil supply system which feeds the oil level controller. […]

The KFC External Float Switch Chamber is available for indirect switch vessel mounting.  The Model KFC can be installed parallel to the vessel wall using additional piping to mount the KEFS or KPFS Float switch to the vessel without installing the switch directly into the vessel wall.  The KFC Float Chamber is made from cast […]

KPRL Low Pressure Regulator The model KPRL is a direct-acting pressure reducing regulator for use with natural gas, air, and a variety of other gases. The regulator outlet pressure is controlled by a diaphragm and an adjustable spring. As the downstream demand for flow changes, the downstream pressure changes. These pressure changes are registered by […]

KSW SIGHT WINDOWS KSW Threaded Sight Windows are a low cost solution for viewing liquids.  The hexagon head body with a male NPT mounting connection allows for easy installation.  Clear glass lens is hermetically sealed and fused to the metal body to ensure leak-proof service and eliminate concerns typically found with traditional gasket type sight […]

KWR & KWT Weld Pad Level Gauges KENCO Weld Pad Flat Glass Gauges are used where direct visual observation of process fluids is required.  This gauge style is designed to be welded directly to the vessel wall and is available with either reflex or transparent glass configurations. Transparent configurations can be provided with mica or […]

KPRV and KBPV Relief Valves APPLICATION The KENCO KBPV Back Pressure Valves are two-way relief valves designed to keep a constant pressure in the discharge lines of a chemical feed pump system. Constant pressure on the discharge side of the chemical feed (metering) pump prevents siphoning, ensuring proper operation of the pump and an accurate […]

KMK Injection Rate Gauge Manifold Assembly U.S. Patent 9,546,897 B1 APPLICATION The Patented KENCO Manifold Kit simplifies the installation of a metering pump and a KENCO Calibration Gauge to a chemical storage tank. The Manifold’s integral ball valve and strainer minimizes assembly, leak paths and installation time. The butterfly handles on the ball valves allow the […]

KEFS Electric Float Switch The KENCO Model KEFS uses a float to determine the presence or absence of liquid in a vessel at the process connection. The float arm assembly consists of a float at one end and a magnet at the other. As the level in the vessel rises, the float rises and the […]

Oil Supply Tanks & Stands The KENCO Oil Supply Tank & Stand System is designed to supply lube oil to the crank case of a compressor or engine in an isolated location where daily supervision and maintenance are an impossibility. KENCO Oil Supply Tank & Stand Systems used in conjunction with our oil level controllers […]

Low Flow Meter The KENCO Low Flow Meter provides an accurate record of the amount of lubricating oil required to maintain a constant oil level in the crankcase of an engine or compressor. Operating Principle The KENCO Low Flow Meter is a positive displacement double action, single piston meter. The piston strokes and actuates a […]