The 17000 Gauge functions as a level indicator and also serves as a pump setting gauge. The rate scale can be calibrated in a variety of options, such as GPM, GPH, GPD, LPM, LPH, or LPD. The maximum pump rate for a 12″ gauge section is 25 GPD. The sight tube in the 17000 is 1″ O.D. glass, which makes it ideal for viscous fluids. The top and bottom connection for this gauge is 1″ MNPT.
The injection rate is checked by closing a valve between the gauge and chemical storage tank and observing the change in fluid height in one minute. Using the rate scale on the front of the polycarbonate shield, count the number of marks the fluid level passed in the one minute test period. This will give you the actual chemical pump rate. If the rate is not the one desired, make an adjustment to the chemical pump feed rate and conduct as many one minute tests as is necessary to set the chemical pump rate to the rate desired. If a higher pump rate is required, the test period can be shortened to 30 seconds or 15 seconds.
*Other sight tube materials available. Consult factory for options.
*Other Seal Materials Available. Consult Factory For Options.
The Rate/Height shield is used for checking the pump rate of a chemical pump. It is calibrated in Gallons/24 hrs., ML/Min and has a height scale labeled in 1/4″ increments.
The Metric Rate/Height shield is used for checking the pump rate of a chemical pump. The Metric Rate/Height shield is calibrated in Liters/24 hrs, ML/Min and has a height scale labeled in 1 CM increments.
The Expanded Metal shield is made from flattened expanded metal and is available in electroplated carbon steel or 304 stainless steel.
The Clear Polycarbonate shield has no markings, and provides 100% visibility as well as environmental protection.
KENCO can provide custom scales to meet your needs. The Polycarbonate custom scales are usually engraved and paint-filled. If you are needing scales indicating tank volume or other scale calibrations, please consult the factory.
** IMPORTANT: Pressure and temperature are dependent on the length of glass and the elastomer chosen. Please consult the factory for minimum and maximum pressure and temperature constraints.